Cal Power IT-M3400 Series User Manual page 62

Table of Contents

Operation Steps:

1. Press [Shift]+[I-set](Function) composite key, and enter the Function menu

2. Rotate the knob, select "List", and press [Enter] key for confirmation. Enter

3. Rotate the knob to select running List file (Run), recalling List file (Recall)

4. Select different functions for setting. For detailed information about List file

Edit List files

1. In the List function setting interface, select Edit, and enter the List file editing

2. At first, select the number of file to be edited. A maximum of 10 List files can

3. Press [Enter] key for confirmation. Enter the List editing page.

Delete

Delete the step and set the step number to delete the

Step

step.

Delete

Delete all steps.

all

Copy

Copy List file 1 to file 2.

File 1 to

During List editing, the instrument would automatically return to the main in-

terface if there is no operation for a long period.

page.

the List function setting page.

and editing List file (Edit) in successive.

Run

Recall

editing, recalling and running, please refer to the specific introduction below.

The running, recalling and editing of List function are mutual prerequi-

sites. When the system has no existed List file, it is necessary to edit List

file, recall List file, and finally run the recalled List file.

menu.

be edited in this instrument.

Edit List = 1/10

1: List Setup

2: Edit Step= 1/1

3: Insert Step= 1/1

4: Add Step= 1/1

5: Delete Step= 1/1

Edit

Advanced Function

Table of Contents