Cal Power IT-M3400 Series User Manual page 85

Category
Home screen
Config Menu
You can do the save and recall operations by the following two methods.
•
•
•
Save Operation
1. Press composite keys [Shift]+
2. Rotate the knob to enter the number 1 to 10 and set the storage location,
Recall Operation
1. Press the composite keys [Shift]+
Parameters
The voltage setting value under CV mode
The current setting value under CC mode.
The power setting value under CP mode.
The resistance setting value under CR mode.
The voltage value and current value under CV+CC mode.
The voltage value and current value under CV+CR mode.
The current value and resistance value under CC+CR.
The V, I, P, R setting value under CV+CC+CP+CR mode.
The voltage setting value under Battery Sim. mode.
Run mode
The status of Von function, mode and level.
Press the composite keys[Shift]+
Press the composite keys [Shift]+
Long press to save the paramenters, and long press the
the parameters.
SCPI commands : *SAV and *RCL
save parameter interface.
Save File = 1
press [Enter] to save.
the recall parameter interface.
Recall File = 1
12.000V 10.000A
description:
Copyright © Itech Electronic Co., Ltd.
System-Related Functions
(Save) to save the parameters.
(Recall) to recall the parameters.
(Save) or long press
(Recall) or long press
to recall
to enter the
to enter
74