Cal Power IT-M3400 Series User Manual page 42

By default, the login password of the Web interface defaults to 12345678. To
change the password, click the Security button in the navigation bar on the left
side of the window after login.
Enter the password and then click the LOGIN button, the Web Interface will ap-
pear in the browser as shown below. The following figure is just as an example
and the Web interface of different models are different. The actual shown page
shall be subject to the connected instrument.
You can select different interfaces by clicking the seven buttons shown in the
navigation bar on the left side of the window. The detailed descriptions are as
follows.
•
Home: Web home interface, displays the model and appearance of the
instrument;
•
Information: displays the serial number of the instrument and more system
information as well as LAN configuration parameters;
•
Web Control: enables the Web control to control the instrument. This page
allows you to monitor and control the instrument;
•
LAN Configuration: reconfigure the LAN parameters;
•
Security: change the password and control access to the Web interface;
•
Manual: go to the ITECH official website and view or download the relevant
documents.
•
Logout: logout the Web interface.
Copyright © Itech Electronic Co., Ltd.
Inspection and Installation
31