Table of Contents
Advertisement
Wiring method:
Insert one end of the anti-reverse connection module to the DC output terminal
and sense terminal of the IT-M3600 rear panel, and connect the other end to
the test line of the DUT. Introduction of the wiring method:
By default, the DC+/DC- and Sense test lines are not of standard configura-
tion during ex-factory. Please make selection based on the test line specifica-
tions. Sense test line specifications: AWG22-300V; DC+/DC- test line
specifications: AWG12-300V
Copyright © Itech Electronic Co., Ltd.
System-Related Functions
90
Advertisement
Table of Contents
