Cal Power IT-M3400 Series User Manual page 66

operation steps:
1. Under source mode, press [Shift]+[I-set](Function) to enter into the function
2. Rotate the knob to select Battery, and press [Enter].
3. Rotate the knob to select Run, Recall, Edit in turn.
4. Select different functions for setting, for detailed operation about battery file
Edit Battery Test File
1. In the battery test function setting interface, select the Edit and enter to the
Batt Mode
Disch/Charge V
Disch/Charge I
Disch/Charge
Time
Cut Off V
Cut Off I
Cut Off Q
During editing, the instrument would automatically return to the main
interface if there is no operation for a long period.
menu interface.
Run Recall
editing, recalling and running, please refers to following introduction.
The running, recalling and editing of List function are mutual
prerequisites. When the system has no existed battery test file, it is
necessary to edit battery test file, recall battery test file, and finally run the
recalled battery test file.
edit file menu.
Copyright © Itech Electronic Co., Ltd.
Battery test mode, charging mode and
discharging mode can be select.
Charge Battery charging mode
Discharge Battery discharging mode
Set the charging voltage or discharging
voltage. The displayed value is different
under charge mode and discharge mode.
Set the charging current or discharging
current. The displayed value is different
under charge mode and discharge mode.
Set the charging or discharging time.
Set the cut off voltage.
Set the cut off current.
Set the cut off capacity.
Edit
Advanced Function
55