Use The Front Panel Menu - Cal Power IT-M3400 Series User Manual

•

3.3 Use the Front Panel Menu

The front panel provides multiple menu keys and the user can access the
instrument menu by using the front panel keys, including Config menu, System
menu, Protect menu and Function menu. And the user can change the related
system setting in the menu. Each menu is briefly described as follows:
•
•
•
•
The user press the complex keys to enter into the menu interface. The menu is
divided according to the function item and the corresponding operation is set in
the lowest level menu item. For example, the key beeper is set in
System→Beep. Set the Beep item to off or on. Please refer to
Menu
for detailed menu description.
After entering the menu interface, the screen displays the optional menu.
Rotate the knob or press left or right keys to view the menu items. When the
number in front of the menu item is blinking, indicates this item is selected
if the cursor value reaches 10, and automatic borrowing is made if the cursor
value reaches 0, thus facilitating user setting. The knob can be used with the
left and right arrow keys, which can move the cursor position and help user
quickly set values.
Press knob to confirm the existing setting, which equals to [Enter] key.
The knob can also be used for scrolling display of the menu items. After
the menu interface is entered, rotate the knob for scrolling display of the
menu items.
The user can set the parameters related to electrical properties in the
Config menu, including the current operation mode, slope, Output delay
time, internal resistance.
The user can set the function related to instrument system in the System
menu, including the key beeper, Sense function, power-on state, trigger
source, communication method, data logger method, digital I/O function
setting, parallel function, system information and so on.
The user can set the parameters related to instrument protection function in
the Protect menu. Including OVP/OCP/OPP/UUT OTP/UCP/UVP.
Functionmenu includes output/input list, / and so on. The parameters
displayed in the source mode and load mode are different. Under function
menu you can setting the Output list, battery charging/discharging test
function, battery simulator and so on.
Reference, 1.7 System Menu Reference
Copyright © Itech Electronic Co., Ltd.
Getting Started
1.6 Configuration
and the corresponding chapters
41