Table of Contents
Advertisement
b. Connect the DUTs. Refer to
(DUT)
for more information about connection methods.
3. Turn on the Link switch of each instrument in turns.
a. Press [Shift]+[P-set] (System) to enter into the system menu interface.
b. Use left and right keys or rotate the knob to select Link and press
[Enter] key to make the parameter in modification.
c. Rotate the knob to set Status and press [Enter] key to confirm.
•
Online: indicates the instrument is in the synchronized relationship.
•
Offline: indicates the instrument is not in the synchronized
relationship.
d. Rotate the knob to set Mode and press [Enter] key to confirm.
•
OnOff Only
•
Track→Reference
•
Duplicate
Copyright © Itech Electronic Co., Ltd.
Multi-Machine Operation
2.5 Connecting the Device Under Test
98
Advertisement
Table of Contents
