Cal Power IT-M3400 Series User Manual page 5

•
Do not use the instrument if it is damaged. Before operation, check the
casing to see whether it cracks. Do not operate the instrument in the
presence of inflammable gasses, vapors or dusts.
•
The instrument is provided with a power cord during delivery and should
be connected to a socket with a protective earth terminal, a junction box
or a three-phase distribution box. Before operation, be sure that the in-
strument is well grounded.
•
Please always use the provided cable to connect the instrument.
•
Check all marks on the instrument before connecting the instrument to
power supply.
•
Ensure the voltage fluctuation of mains supply is less than 10% of the
working voltage range in order to reduce risks of fire and electric shock.
•
Do not install alternative parts on the instrument or perform any unau-
thorized modification.
•
Do not use the instrument if the detachable cover is removed or loosen.
•
To prevent the possibility of accidental injuries, be sure to use the power
adapter supplied by the manufacturer only.
•
We do not accept responsibility for any direct or indirect financial dam-
age or loss of profit that might occur when using the instrument.
•
This instrument is used for industrial purposes, do not apply this product
to IT power supply system.
•
Never use the instrument with a life-support system or any other equip-
ment subject to safety requirements.
Copyright © Itech Electronic Co., Ltd.
IT-M3400 Series User Manual
III