Multi-Channel Function - Cal Power IT-M3400 Series User Manual

Multi-Machine Operation
•
Synchronization operation:

8.1 Multi-Channel Function

For multi-channel operation controlled by the PC software, the user will need to
install one communication card only into one of the multiples units, and other
instruments are connected with the PC through a multi-channel connection with
system bus. The cost of the communication cards is saved, and the connection
interface on the PC side is also reduced. When using the multi-channel
function, the instruments in the channels do not require the same model, and all
models in the same series can form a multi-channel power system. Up to 16 *
16 channels, each instrument in the control system can be controlled
independently in software, and each channel can be operated completely
independently.
Copyright © Itech Electronic Co., Ltd.
94