Backing Up, Restoring, And Upgrading Files; Upgrading The Mirage Sst Software; Exporting Backup Settings To An External Device - Christie Mirage SST User Manual

Hide thumbs Also See for Mirage SST:

Table of Contents

Backing up, restoring,

and upgrading files

Learn how to back up, restore, and upgrade files.

When a new version of the software is released, Mirage SST must be upgraded.

1. Turn off the lasers before proceeding with the upgrade.

2. Insert a USB key that contains the software upgrade file.

The USB flash drive must be formatted using the FAT 32 file system.

The upgrade file must be located at the root of the USB key.

3. From the display panel, select MENU > Admin.

4. Select Software > Upgrade.

5. Select an upgrade file and select Enter.

6. To automatically restart Mirage SST, select Restart Now.

If you decide restart Mirage SST at a later date (Restart Later), you cannot perform another

upgrade until the Mirage SST is restarted.

Save the Mirage SST settings to a USB flash drive (projector) or file (web interface).

1. If using the display panel to export settings, insert a USB flash drive (properly formatted as

FAT) into the USB port on Mirage SST.

2. Select MENU > Admin > Backup & Restore.

3. Select the backup option.

•

On the projector, select Backup to USB.

•

On the web interface, select Backup to File.

A default name is assigned.

4. To edit the backup file name, select the up arrow and select Enter.

5. To save the name, navigate down and select SAVE.

The backup file is exported.

Mirage SST User Guide

020-102993-01 Rev. 1 (06-2019)

Table of Contents