DataCard ImageCard User Manual page 79

4-10
5
6
7
8
b Use the cleaning stick to move the heated roller
counterclockwise and make another area available for
cleaning (step 2 in
E
If the heated roller does not move, clean the visible area and
continue with step 5.
c Repeat steps a and b to clean the entire area of the heated
roller.
Figure 4-9: Clean the heated roller
Replace the overlay cartridge. See
cartridge" on page 2-20.
Close the cover by lifting the top slightly. Move the cover support
up so it is parallel with the hinges. Close the cover of the printer.
Power on the printer to resume card production.
Repeat if needed.
Figure 4-9).
1
"Replacing the overlay
User's Guide for the Magna™ Class Printer
Maintaining the printer
2