Load The Print Ribbon - DataCard ImageCard User Manual

Getting started
3

Load the print ribbon

1
2
3
4
User's Guide for the Magna™ Class Printer
Grasp the ribbon cartridge handle, and lift up to remove the
ribbon cartridge (see
Ribbon supply
Figure 2-14: Remove the print ribbon cartridge
If used print ribbon is in the printer, remove the used ribbon and
used ribbon spool from the ribbon cartridge shafts.
i
The print ribbon has a negative image of the information printed
on the card. Dispose of print ribbon according to your policy for
protecting the data that might be visible on it.
Unwrap the new print ribbon.
Slide the full supply roll onto the left ribbon cartridge shaft (see
Figure 2-15).
Slide the empty take-up ribbon spool onto the right ribbon
cartridge shaft. Leave very little slack in the ribbon between the
ribbon cartridge shafts (see
Figure 2-14).
Ribbon take-up
Figure 2-15).
2-15