Powering On The System - DataCard ImageCard User Manual

Getting started
3

Powering on the system

Before installing the printer driver and before using the printer, follow
these steps to power on the printer.
User's Guide for the Magna™ Class Printer
Figure 2-20: Lift the handle, move the debower, and lower it
To close the cover, lift the top slightly. Move the support up so it is
parallel with the hinges, as shown in
E
If you are setting up the printer, check the bow on the test card
when you make it. If you are returning to this procedure after
running the printer with other cards, make several test or sample
cards to be sure the setting produces the desired result.
E
If you are switching to proximity cards or use smart cards, be
sure to test the function of the card after applying the overlay or
topcoat.
Off
On
Figure 2-12.
2-23