DataCard ImageCard User Manual page 26

Getting started
9
10 Make sure the card cartridge is securely seated in the printer. If
11 Remove the printhead packing tape.
User's Guide for the Magna™ Class Printer
– User's Guide
– Printer driver
– Supplies kit if one was ordered with this printer
Figure 2-4: Place the card output stacker on the printer
Place the card output stacker on the right end of the printer
(Figure 2-4). The card output stacker hooks into the printer.
needed, move it gently to seat it.
a Lift the top cover and then move the support down so it rests
on the internal frame, as shown in Figure 2-5.
2-7