Selecting The Site; Electrical Requirements; Physical Requirements - DataCard ImageCard User Manual

2-2
•
•
•
•
•

Selecting the site

After meeting general requirements, the site for the Magna Class
printer should meet the electrical, physical, and environmental
requirements of the printer. Finally, be sure to select an appropriate
site for printer supplies.

Electrical requirements

The Magna Class printer requires the following electrical conditions
for optimal performance:
•
•
The maximum input current for the Magna Class printer is 3 amps at
100 VAC applied.

Physical requirements

The Magna Class printer requires an environment that
accommodates its physical dimensions and weight.
The printer weighs between 36 and 44 pounds or 16.4 and 19.5
kilograms. The weight varies depending on the options installed in the
printer.
Do not use the Magna Class printer for purposes other than its
intended use.
When cleaning around the Magna Class printer, prevent debris
from entering the printer.
Place the Magna Class printer in a clean office environment,
protected from any type of construction.
Store all supplies (ribbons, cards, etc.) in the original packaging
until loaded in the cartridges. Keep the original packaging closed.
Store all supplies in a clean, cool, dry location. See
storage" on page B-5
environment for Magna Class supplies.
90-254 VAC at 50/60 Hz (The Magna Class printer automatically
adjusts to any power within this range.)
Single phase, 3-wire grounded receptacle only
for information about the storage
User's Guide for the Magna™ Class Printer
Getting started
"Supply roll