Attach Door Dormer To Fort - KidKraft BOULDER STATION Installation And Operating Instructions Manual

Step 34: Attach Door Dormer to Fort
A: Above (8197) Door Panel, flush to the top of the first (2232) Siding and tight to the centre (2181) Short Post
bolt attach Dormer from Step 7, Part 1 to (2166) Door Arch and (2186) Back Front Wall with 2 (S7) #2 x 2" Pan
Screws per (2347) Roof Block. (fig. 34.1)
B: Place Roof Trim Assembly with Door Roof Grill from Step 7, Part 2 centred over the pilot holes of (2348)
Roof Board A and (2349) Roof Board B and tight to the underside of each board. (fig. 34.2)
C: Attach (2349) Roof Board B to (2426) Roof Trim with 2 (S2) #8 x 1-1/2" Wood Screws. (fig. 34.2)
D: Attach (2348) Roof Board A to (2426) Roof Trim with 1 (S2) #8 x 1-1/2" Wood Screw in the bottom hole and
1 (S3) #8 x 2-1/2" Wood Screw in the top hole. (fig. 34.2)
2347
8197
S7
Flush and Tight
S2
2426
Hardware
1 x
S3
3 x
S2
4 x
S7
Fig. 34.1
2186
2166
2348
#8 x 2-1/2" Wood Screw
#8 x 1-1/2" Wood Screw
#12 x 2" Pan Screw
84
Fig. 34.2
S3
S2
2349
S2
2426