Configuring The Stelnet Client Function; Establishing The Configuration Task - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
Procedure
Step 1 Run the display ssh server status command to view the global configuration of the SSH server.
----End
Example
Run the display ssh server status command, and you can view that the SSH version of the SSH
session is 1.99, and the times for re-establishing the SSH session is 5.
<Quidway> display ssh server status
SSH version
SSH connection timeout
SSH server key generating interval : 2 hours
SSH Authentication retries
SFTP server
Stelnet server
Scp server
SSH server port

9.5 Configuring the STelnet Client Function

This section describes how to configure the STelnet client. A secure connection between the
client and server can be established through negotiation, and the client will be able to log in to
the server similarly to using Telnet services.

9.5.1 Establishing the Configuration Task

Before configuring an STelnet client, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This can help you complete
the configuration task quickly and accurately.
Applicable Environment
STelnet is a secure Telnet protocol. The SSH user can use the STelnet service in the same manner
as using the Telnet service.
Pre-configuration Tasks
Before connecting the STelnet client to the SSH server, complete the following tasks:
l
l
l
Data Preparation
To connect the STelnet client to the SSH server, you need the following data:
Issue 01 (2011-07-15)
NOTE
If the number of the monitored port is the default number, information about the currently monitored port
will not be displayed.
Generating the local RSA key pair on the SSH server
Configuring the STelnet user on the SSH server
Enabling the STelnet service on the SSH server
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: 1.99
: 60 seconds
: 5 times
: Enable
: Enable
: Enable
: 55535
9 Telnet and SSH
134