Disconnecting From The Ftp Server; Configuring The Switch To Be The Tftp Client - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
Context
The username and password are of string data type. The string length for username must be in
the range of 1 to 85 case-insensitive characters and password must be in the range of 1 to 16
case-insensitive characters.
Procedure
Step 1 Run:
user username [ password ]
The current login user is changed and the user logs in again.
----End

8.4.9 Disconnecting from the FTP Server

This section describes how the client switch disconnects from FTP server.
Prerequisite
The configurations must be performed in the FTP view.
Procedure
Step 1 Run:
bye
or
quit
The client switch is disconnected from the FTP server.
Return to the user view.
Step 2 Run:
close
or
disconnect
The client switch is disconnected from the FTP server.
This command terminates the FTP session.
----End

8.5 Configuring the Switch to Be the TFTP Client

You can configure a switch to be an FTP client and then log in to the FTP server.
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 FTP and TFTP
103