Huawei Quidway S2700 Series Configuration Manual page 82

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
l
l
Procedure
Step 1 Configure the priority of VTY0 to be 2 and the disconnection time within 30 minutes.
<Quidway> system-view
[Quidway] user-interface vty0
[Quidway-ui-vty0] user privilege level 2
[Quidway-ui-vty0] authentication-mode aaa
[Quidway-ui-vty0] idle-timeout 30
[Quidway-ui-vty0] quit
Step 2 Configuring the local username, the password, and user level.
[Quidway] aaa
[Quidway-aaa] local-user huawei password cipher huawei
[Quidway-aaa] local-user huawei privilege level 2
----End
Configuration Files
#
sysname Quidway
#
aaa
local-user huawei password cipher N`C55QK<`=/Q=^Q`MAF4<1!!
local-user huawei privilege level 2
local-user huawei idle-cut
#
authorization-scheme default
#
accounting-scheme default
#
domain default
#
user-interface vty 0
authentication-mode aaa
user privilege level 2
idle-timeout 30
#
return
Issue 01 (2011-07-15)
Username and password for authentication
Disconnect time
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 User Management
71