Huawei Quidway S2700 Series Configuration Manual page 168

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
[Quidway-rsa-key-code] BFF35E4B C61BD786 F907B5DE 7D6770C3 E5FD17AB
[Quidway-rsa-key-code] 203C8FCB BBC8FDF2 F7CB674E 519E8419 0F6B97A8
[Quidway-rsa-key-code] EA91FC4B B9E18836 5E74BFD5 4C687767 A89C6B43
[Quidway-rsa-key-code] 1D7E3E1B
[Quidway-rsa-key-code] 0203
[Quidway-rsa-key-code] 010001
[Quidway-rsa-key-code] public-key-code end
[Quidway-rsa-public-key] peer-public-key end
Step 5 Bind the RSA public key of the SSH client to Client002.
[Quidway] ssh user client002 assign rsa-key RsaKey001
Step 6 Enable the STelnet service on the SSH server.
# Enable the STelnet service.
[Quidway] stelnet server enable
Step 7 Set the service type of Client001 and Client002 to STelnet.
[Quidway] ssh user client001 service-type stelnet
[Quidway] ssh user client002 service-type stelnet
Step 8 Connect the STelnet and the SSH server.
# You must enable the initial authentication on the SSH client for the first login.
[client001] ssh client first-time enable
[client002] ssh client first-time enable
# Client001 logs in to the SSH server in password authentication mode by entering the user
name and password.
<client001> system-view
[client001] stelnet 10.164.39.222
Please input the username:client001
Trying 10.164.39.222 ...
Press CTRL+K to abort
Connected to 10.164.39.222 ...
The server is not authenticated. Continue to access it?(Y/N):y
Save the server's public key?(Y/N):y
The server's public key will be saved with the name: 10.164.39.222. Please wait...
Enter password:
Enter the password huawei, and information indicating that the login succeeds is displayed as
follows:
info: The max number of VTY users is 20, and the current number
<Quidway>
# Client002 logs in to the SSH server in RSA authentication mode.
<client002> system-view
[client002] stelnet 10.164.39.222
Please input the username: client002
Trying 10.164.39.222 ...
Press CTRL+K to abort
Connected to 10.164.39.222 ...
***********************************************************
info: The max number of VTY users is 20, and the current number
<Quidway>
Step 9 Verify the configuration.
After the configuration, run the commands of display ssh server status and display ssh server
session on the SSH server. You can view that the STelnet service is enabled, and that the STelnet
client logs in to the server successfully.
Issue 01 (2011-07-15)
of VTY users on line is 1.
of VTY users on line is 1.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Telnet and SSH
157