Huawei Quidway S2700 Series Configuration Manual page 119

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
Networking Requirements
As shown in
10.1.1.1/24.
The Switch acts as the FTP server. VLAN 10 is created on the Switch and Ethernet0/0/1 is added
to VLAN 10. The IP address 10.1.1.2/24 is assigned to VLANIF 10.
The PC uploads files to the Switch.
Figure 8-1 Networking diagram of the Switch functioning as the FTP server
FTP Client
Switch
FTP Server
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Procedure
Step 1 Create VLAN 10 on the Switch and assign the IP address 10.1.1.2/24 to VLANIF 10.
<Quidway> system-view
[Quidway] vlan 10
[Quidway-vlan10] quit
[Quidway] interface ethernet 0/0/1
[Quidway-Ethernet0/0/1] port hybrid pvid vlan 10
[Quidway-Ethernet0/0/1] port hybrid untagged vlan 10
[Quidway-Ethernet0/0/1] quit
Issue 01 (2011-07-15)
Figure 8-1, the local PC functions as the FTP client of which the IP address is
FTP Session
Ethernet
PC
Interface
Ethernet0/0/1
Set the correct FTP user name and password on the Switch that functions as the FTP server.
Log in to the Switch through FTP from the PC.
Upload files to the FTP server.
IP address of the FTP server
Name of the FTP user set as u1 and the password set as ftppwd on the server
Correct path of the source file on the PC
Name of the destination file and position where the destination files are located on the
Switch
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
VLAN10
L2 Switch
Ethernet
VLANIF interface
VLANIF 10
8 FTP and TFTP
FTP Server
Switch
IP address
10.1.1.2/24
108