Checking The Configuration; Configuring Vty User Interface; Establishing The Configuration Task - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
l
----End

5.3.6 Checking the Configuration

After configuring the console user interface, you can view the usage information of the user
interface, physical attributes and configurations of the user interface, local user list, and online
users.
Prerequisite
The configurations of the User Management function are complete.
Procedure
l
l
l
l
----End

5.4 Configuring VTY User Interface

You can configure the VTY user interface to maintain a remote switch.

5.4.1 Establishing the Configuration Task

Before configuring a VTY interface, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This can help you complete
the configuration task quickly and accurately.
Applicable Environment
If you want to log in to the switch using Telnet or SSH to perform management or configuration
operations, .a VTY interface is required.
Issue 01 (2011-07-15)
Configuring Non-Authentication
1. Run:
system-view
The system view is displayed.
2. Run:
user-interface console interface-number
The console user interface view is displayed.
3. Run:
authentication-mode none
The authentication mode is set to non-authentication.
Run the display users [ all ] command to check information about user interface.
Run the display user-interface console ui-number1 [ summary ] command to check
physical attributes and configurations of the user interface.
Run the display local-user command to check the local user list.
Run the display access-user command to check online users.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 User Management
58