Checking The Configuration; Managing User Interfaces; Establishing The Configuration Task - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
----End

5.4.6 Checking the Configuration

After configuring the VTY user interface, you can view the usage information of the user
interface, the maximum number of VTY user interfaces, and physical attributes and
configurations of the user interface.
Prerequisite
The configuration of VTY User Interface are complete.
Procedure
l
l
l
----End

5.5 Managing User Interfaces

You need to configure user management to ensure that the operator manages switchs safely.

5.5.1 Establishing the Configuration Task

Before configuring user management interfaces, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the required data. This can help
you complete the configuration task quickly and accurately.
Applicable Environment
To ensure that the operator managesswitchs safely, you need to send messages between user
interfaces and clear designated user.
Pre-configuration Tasks
Before managing the user interface, complete the following tasks:
Issue 01 (2011-07-15)
system-view
The system view is displayed.
2. Run:
user-interface vty number1 [ number2 ]
The VTY user interface view is displayed.
3. Run:
authentication-mode none
The authentication mode is set to none.
Run the display users [ all ] command to check the usage information of the user interface.
Run the display user-interface maximum-vty command to check the number of maximum
VTY user interfaces.
Run the display user-interface [ [ ui-type ] ui-number1 | ui-number ] [ summary ]
command to check the physical attributes and configurations of the user interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 User Management
63