Establishing The Configuration Task; Establishing The Physical Connection - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration

1.3.1 Establishing the Configuration Task

Before configuring login to the switch through Telnet, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the required data. This can help
you complete the configuration task quickly and accurately.
Applicable Environment
If you know the IP address of the switch, you can log in to the switch through Telnet for local
or remote configuration.
Pre-configuration Tasks
Before configuring the switch through Telnet, complete the following tasks:
l
l
Data Preparation
To log in to the switch through Telnet, you need the following data.
No.
1
2
3

1.3.2 Establishing the Physical Connection

This part describes how to physically connect a terminal to a switch before login to the switch
through Telnet.
Prerequisite
Establishing the Physical Connection are complete.
Procedure
Step 1 Connect the switch and the PC directly or connect the switch and the PC to the network through
cables.
----End
Issue 01 (2011-07-15)
Powering on devices and performing a self-check
Preparing the PC (including the serial port and Ethernet crossover/direct cable)
Data
IP address of the PC
IP address of the Ethernet interface on the switch
User information accessed through Telnet:
l User name
l Password
l Authentication mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Logging In to Switch
5