Huawei Quidway S2700 Series Configuration Manual page 163

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
Step 3 Configure the password of the SSH user Client001 to huawei.
[SSH Server] aaa
[SSH Server-aaa] local-user client001 password cipher huawei
[SSH Server-aaa] local-user client001 privilege level 3
[SSH Server-aaa] local-user client001 service-type ssh
[SSH Server-aaa] quit
Step 4 Enable the STelnet service on the SSH server.
[SSH Server] stelnet server enable
[SSH Server] ssh authentication-type default password
Step 5 Verify the configuration.
# Log in to the device through the software putty, and specify the IP address of the device being
192.168.1.1 and the login protocol being SSH.
# Log in to the device through the software putty, and enter the user name client001 and the
password huawei.
Issue 01 (2011-07-15)
NOTE
If SSH is configured as the login protocol, the S2700 automatically disables Telnet.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Telnet and SSH
152