Configuring Ssh Users; Establishing The Configuration Task - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
Prerequisite
The configuration of Telnet Terminal Services are complete.
Procedure
l
l
l
l
----End
Example
Run the display tcp status command to view TCP connections. In the command output,
Established indicates that a TCP connection has been established.
<Quidway> display tcp status
TCPCB
39952df8
Closed
32af9074
Listening
34042c80
Established
Run the display telnet server status command to view the configuration and status of the Telnet
server.
<Quidway> display telnet server status
TELNET IPV4 server
TELNET IPV6 server
TELNET server port

9.3 Configuring SSH Users

SSH users must be configured to ensure that STelnet or SFTP clients are able to log in to SSH
servers.

9.3.1 Establishing the Configuration Task

Before configuring SSH users, familiarize yourself with the applicable environment, complete
the pre-configuration tasks, and obtain the required data. This can help you complete the
configuration task quickly and accurately.
Applicable Environment
The STelnet or SFTP client can log in to the SSH server to perform operations only after SSH
users are correctly configured on the SSH server.
Pre-configuration Tasks
Before configuring SSH users, complete the following tasks:
Issue 01 (2011-07-15)
Run the display users command to check information about connected users.
Run the display users all command to check information about all users, including
connected and disconnected users.
Run the display tcp status command to check TCP connections.
Run the display telnet server status command to check the configuration and status of the
Telnet server.
Tid/Soid Local Add:port
36 /1509 0.0.0.0:0
59 /1 0.0.0.0:21
73 /17 10.164.39.99:23
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Foreign Add:port
0.0.0.0:0
0.0.0.0:0
10.164.6.13:1147
:Enable
:Enable
:23
9 Telnet and SSH
VPNID State
0
14849
0
123