Huawei Quidway S2700 Series Configuration Manual page 73
Hide thumbs
Also See for Quidway S2700 Series:
- Configuration manual (354 pages) ,
- Hardware installation and maintenance manual (183 pages) ,
- Quick start manual (62 pages)
Table of Contents
Advertisement
Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
l
l
l
Procedure
l
l
l
Issue 01 (2011-07-15)
AAA authentication: requires the user name and password.
Password authentication: requires no user name but a password must be set. Otherwise, the
user can log in to the switch only through the console interface.
None: requires neither user name nor password. No authentication is needed when the user
logs in to the switch.
Configuring AAA Authentication
1.
Run:
system-view
The system view is displayed.
2.
Run:
user-interface vty number1 [ number2 ]
The VTY user interface view is displayed.
3.
Run:
authentication-mode aaa
The authentication mode is set to AAA.
4.
Run:
quit
Exit from the VTY user interface view.
5.
Run:
aaa
The AAA view is displayed.
6.
Run:
local-user user-name password { simple | cipher } password
Name and password of the local user are created.
Configuring Password Authentication
1.
Run:
system-view
The system view is displayed.
2.
Run:
user-interface vty number1 [ number2 ]
The VTY user interface view is displayed.
3.
Run:
authentication-mode password
Set the authentication mode as password.
4.
Run:
set authentication password { cipher | simple } password
A password for this authentication mode is set.
Configuring Non-Authentication
1.
Do as follows on the switch, run:
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 User Management
62
Advertisement
Table of Contents
