Configuring Data Type And Transmission Mode For The File; Optional) Viewing Online Help Of The Ftp Command - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
----End

8.4.3 Configuring Data Type and Transmission Mode for the File

This section describes how to configure the data type and transmission mode for the file.
Context
Do as follows on the switch that serves as the client:
Procedure
Step 1 Run:
ascii | binary
The data type of the file to be transmitted is ascii or binary mode.
FTP server supports ascii mode for data transmission. But in Quidway S2700 Series, user has to switch to binary
mode for data transfer.
Step 2 Run:
passive
The passive file transfer mode is configured.
Step 3 Run:
verbose
The verbose mode for FTP is enabled.
When verbose is enabled, all FTP responses are displayed. After file transmission, the statistics
about transmission efficiency will be displayed.
----End

8.4.4 (Optional) Viewing Online Help of the FTP Command

This section describes how to view the online help of the FTP command.
Context
This configuration provides help information for protocol commands.
Procedure
Step 1 Run:
remotehelp command
The online help of the FTP command is displayed.
----End
Issue 01 (2011-07-15)
The switch is connected to the FTP server.
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 FTP and TFTP
100