Logging In To The S2700 Through The Console Interface - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration

5.2.2 Logging In to the S2700 Through the Console Interface

Context
When setting up a local configuration environment through the console interface, you can
connect the PC and the S2700 through the Windows HyperTerminal.
Procedure
Step 1 Enable the HyperTerminal on the PC.
Choose Start > All Programs > Accessories > Communications > HyperTerminal to start
the HyperTerminal.
Step 2 Set up a new connection.
As shown in
an icon. Click OK.
Figure 5-3 Setting up a new connection
Step 3 Set the connection port.
After entering the Connect window as shown in
Connect drop-down list box according to the port used by the PC or the configuration terminal.
Select COM1 in this case, and click OK.
Issue 01 (2011-07-15)
Figure 5-3, enter the name of the new connection in the Name text box and choose
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-4, select a serial port from the
5 User Management
50