Enabling The Ftp Server; Configuring A Basic Acl - Huawei Quidway S2700 Series Configuration Manual

Hide thumbs Also See for Quidway S2700 Series:
Table of Contents

Advertisement

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
Applicable Environment
When the switch serves as the FTP server, for security, you can configure the switch by the
access control list (ACL) to be accessed by only those clients that meet the matching conditions.
Pre-configuration Tasks
Before configuring the FTP ACL, complete the following tasks:
l
l
Data Preparation
To configure the FTP ACL, you need the following data.
No.
1

8.3.2 Enabling the FTP Server

The FTP server is disabled by default. You need to enable the FTP server before using FTP
functions.
Context
Do as follows on the switch that serves as the FTP server:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ftp [ ipv6 ] server enable
The FTP server is started.
----End

8.3.3 Configuring a Basic ACL

You can configure a basic ACL and define rules by specifying the source IP address.
Context
Do as follows on the switch that serves as the FTP server:
Issue 01 (2011-07-15)
Powering on the switch
Connecting the FTP client with the server
Data
ACL number
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 FTP and TFTP
96

Advertisement

Table of Contents
loading

Table of Contents