Table of Contents
Advertisement
Step 3:
Insert the iRIS-2400 module. Push the module in at a 20º angle
(Figure 4-7).
Step 4:
Seat the iRIS-2400 module. Gently push downwards and the arms
clip into place (Figure 4-7).
4.7 Full-size PCIe Mini Card Installation
The PCIe Mini card slot allows installation of either a full-size or half-size PCIe
Mini card. To install a full-size PCIe Mini card, please follow the steps below.
Step 1:
Locate the PCIe Mini card slot. See Chapter 3.
Step 2:
Remove the retention screw. Remove the retention screw as
shown in Figure 4-8.
Figure 4-8: Removing the Retention Screw
Step 3:
Insert into the socket at an angle. Line up the notch on the card
with the notch on the slot. Slide the PCIe Mini card into the socket at an angle
of about 20º (Figure 4-9).
Chapter 4
59
Installation
Advertisement
Table of Contents
