Using CallPilot Manager to monitor hardware
Maintenance page
Introduction
Use the Maintenance page to get status information for any suspect
components.
If you suspect or discover a problem with hardware such as an MPC-8 card,
or the DS30X link, you can use the Diagnostic section on the Maintenance
page. You can run a new diagnostic for the component, or review the results
of the last diagnostic that was run.
More information
For information on all aspects of the Maintenance page, see Section B:
"Working with the Maintenance page" on page 79, or the CallPilot Manager
online Help.
76
Standard 1.0
CallPilot