.
Appendix
Peripheral Controller HEX codes and
cable connection diagrams
This appendix lists Peripheral Controller card HEX messages displayed
during self-test on the two-character display located on the Peripheral
Controller faceplate. It also illustrates the connection diagrams of the Fiber
Remote Multi-IPE Interface units at the local and the remote sites.
Peripheral Controller hexadecimal codes
Table 30 "Peripheral Controller self-test HEX codes" (page 149)
the Peripheral Controller hexadecimal codes displayed on the faceplate
display.
Table 30
Peripheral Controller self-test HEX codes
Copyright © 2007-2009 Nortel Networks
.
HEX code
Test description
01
MPU confidence test
02
MPU internal RAM
03
Boot EPROM test
04
RAM test
05
MPU addressing mode test
06
ID EPROM test
07
FLASH EPROM test (the programmable part)
08
Watchdog timer test
09
MPU timers test
0A
DUART port A
0B
DUART port B
0C
A31 #1 external buffer
0D
A31 #1 internal context memory (phase A)
0E
A31 #1 internal context memory (phase B)
Nortel Communication Server 1000
Fiber Remote Multi-IPE Interface Fundamentals
NN43021-556 03.01
11 May 2009
149
lists