Determine Ip Trunk Card Software Release; Transmit Card Properties And Dialing Plan - Nortel 1000 Fundamentals

Determine IP trunk card software release

Follow the steps in
release" (page 419)
trunk card.
Procedure 71
Determining the IP trunk card software release
Step
1
2
3

Transmit card properties and dialing plan

It is not necessary to disable IP trunk cards when transmitting a dialing
plan alone.
Follow the steps in
and dialing plan" (page 419)
dialing plan.
Procedure 72
Transmitting IP trunk card properties and dialing plan
Step
1
2
3
Copyright © 2007, Nortel Networks
.
Procedure 71 "Determining the IP trunk card software
to determine the current software release on the IP
Action
In the IP Telephony Gateway window in TM 3.1, double-click the
replacement IP trunk card to open the Card properties window.
Leave the default selection of the IP trunk card in the Card
Properties window and click the Configuration tab.
Check that the "S/W release" shows the latest recommended
software version.
If the replacement IP trunk card requires a software upgrade, refer to
"Software upgrade mechanisms" (page
Procedure 72 "Transmitting IP trunk card properties
Action
In the IP Telephony Gateway window, select the replacement IP
trunk card.
Click menu Configuration > Synchronize > Transmit.
The ITG – Transmit Options window appears.
Select the Transmit to selected cards radio button. Check the
Card properties and Dialing plan boxes only.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Replace an IP trunk card 419
—End—
414).
—End—
to transmit IP trunk card properties and the