Junction Box - Honda Goldwing GL1200L 1985 Manual

Cruise Control
Junction Box
1......" ••' ... 4\ - - - - - - - - - - - - - - - - - - - - - -
Assembly/Installation
COIIITR()L ARM
~~~
RETURN SPRING
faces of the control arm and shaft with
contaminants aw.ay from box
luu'fac:Alt_
Clean parts with solvent before
CAUTION:
Hook the ends of the return the case and
arm with the control arm in the six o'clock
lion. Rotate the control arm counterclockwise to the
twelve o'clock
and
it back into the
JunctlCln
box ass,emblv.
Coat the
grease.
CONTROL ARM
WASHER
/
@b
\
CIRCUP
on the drum shaft. In-
out. Be sure
groove.
Install the washer and a new
stall the with the
the is seated all the way around the
Connect the throttle cables to the box. Coat the
faces of the cable drum and drum shaft with
grease.
NOTE: install the cable drum with the the
inside. Connect the cables to the cable drum with the
stopp~~r c,ontaciting the control arm.
Insert the ends of the throttle cables into the slots in the
cable drum. Install the cable drum in the case.
Install the ;,
In,di..-,n
box on the bracket.
page i
lock nut.
the cable
the throttle cables
Recheck the throttle
Grless,e the end of the actuator cable and connect the
cable end to the control arm.