Front Brake Light Switch; Rear Brake Light Switch; Handlebar Switch - Honda NX250 1989 Manuals

LIGHTS/METERS/SWITCHES

FRONT BRAKE LIGHT SWITCH

Disconnect the front brake light switch connectors and check
for continuity.
The switch should show continuity with the front brake ap-
plied.
Replace the switch if necessary.

REAR BRAKE LIGHT SWITCH

Disconnect the rear brake light switch and check for continui-
ty.
The switch should have continuity with the rear brake applied
and no continuity with the released.
Replace or readjust the rear brake light switch if necessary.
See page 3-14 for adjustment procedures.
CLUTCH SWITCH
Disconnect the clutch switch connectors and check for conti-
nuity.
The switch should have continuity with the clutch lever ap-
plied.
Replace the clutch switch if necessary.

HANDLEBAR SWITCH

RIGHT HANDLEBAR SWITCH
Remove the front fairing (page 15-2|.
Disconnect the right handlebar switch connector (9P( and
check for continuity between terminals.
Continuity should exist between the color coded wires in each
chart.
Starter Button
IG
FREE
PUSH
О
Bl/W
COLOR
19-6
У
ST
HLi
0
•
W/G
Y/R
Br
(1) REAR BRAKE
LIGHT SWITCH
Engine Stop Switch
HL2
OFF
RUN
Bu/W COLOR
IG BATe
о
О
Bl/W Bl/R