A1.4.7 Fit Accessory Menu; A1.4.8 Ip Configuration Menu; Fit Accessory Menu; Ip Configuration Menu - Edwards iXL600 Instruction Manual

A1.4.7

FIT ACCESSORY menu

Under the Setup menu. Scroll by pressing up/down keys. Press ENTER to open a sub menu or CANCEL to exit back to
the Setup menu.
Gate Valve...
Water Sensor...
Active Gauge...
Exh Gas Temp...
For an accessory press the up/down keys to select Fitted or Not Fitted and press ENTER to accept or CANCEL to exit
back to the COMMANDS menu.
Note: Gate Valves additionally have an option of Fitted No Feedback for use where there are no position feedback
switches fitted to the gate valve.
A1.4.8

IP Configuration menu

Under the Setup menu. Scroll by pressing up/down keys. Press ENTER to open a sub menu or CANCEL to exit back to
the Setup menu.
Host_Name...
DHCP Enable...
IP Address...
Address Mask...
DNS Server...
Gateway...
NTP Server...
SMTP Server...
MAC Address...
Domain Name...
*
Press the up/down keys to select Enabled or Disabled and press ENTER to accept or
CANCEL to exit back to the IP Configuration menu.
†
For each address setting press the up/down keys to set the digit, press ENTER to
accept and move to the next digit or CANCEL to move back to the previous digit.
Pressing ENTER at the end of the line will accept the new setting and exit back to the
Edit IP menu. Pressing CANCEL at the start of the line will cancel and exit back to the
IP Configuration menu.
Display only items press CANCEL to exit back to the IP Configuration menu.
© Edwards Limited 2015. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Table A8 - FIT ACCESSORY menu
(Analogue water flow)
(Exhaust Gas Temperature)
Table A9 - IP Configuration menu
(display only)
(Enabled / Disabled)
(xxx.xxx.xxx.xxx)
(xxx.xxx.xxx.xxx)
(xxx.xxx.xxx.xxx)
(xxx.xxx.xxx.xxx)
(display only)
(display only)
(display only)
(display only)
A540-55-880 Issue D
*
†
†
†
†
Page 53