Table of Contents
Advertisement
Description
Hardness
Resistivity
Materials in contact with cooling
water
Water inlet connection
Water outlet connection
*
Water consumption varies with pump operating temperature and water temperature; these figures measured
at factory default internal pump temperature, 15 °C water inlet temperature and ultimate inlet pressure.
Note:
The temperature management system is a valved system and the 'Rated Min Pressure Differential' may not
correlate with water flow rates stated in the table under all operating conditions. The 'Rated Min Pressure
Differential' is required to maintain adequate cooling water flow under adverse operating conditions.
© Edwards Limited 2015. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Table 9 - Water cooling system data (continued)
Rating
<100
1k ≤ ρ ≤ 1000k
Stainless steel, PVDF, Nitrile, PTFE
and fluoroelastomer
3/8 inch male quick connector
3/8 inch female quick connector
A540-55-880 Issue D
Units
ppm of CaCO
3
(<100 mg of CaCO
per litre)
3
ohm-cm
Page 13
Hide quick links:
Advertisement
Table of Contents
