Screen Making Area; Screen Making Start Position; Margin And Image Area - Riso GOCCOPRO QS2536 User Manual

2. Overview of this Machine

Screen Making Area

Screen Making Start Position

Screen making starts from the Top side of the screen frame.
The screen making start position is fixed to 90 mm (3.54") from the outer edge of the screen frame (and
cannot be changed).

Screen making start position

Margin and Image Area

Always consider that there will be a margin between the screen frame and the transferred image.
The minimum margin size on the Bottom side, Front side, and Rear side is 45 mm (1.77") from the inside
of the screen frame.
The minimum size of the image area is 10 mm x 10 mm (0.39" x 0.39").
The maximum size can be calculated as follows.
90 mm (3.54")
Length (A)
26
Top
Front
90 mm (3.54")
45 mm (1.77") or more
Width
(B)
Rear
Bottom
Minimum: 10 mm (0.39")
Maximum: Whichever of the following values is smallest
457 mm (17.99")
Width of screen frame
−
outer dimensions
Minimum: 10 mm (0.39")
Maximum: The following value
Length of screen frame
−
outer dimensions
*Screen making start position + Minimum margin size
Screen frame 90 mm
−
thickness x 2 (3.54")*
*Minimum margin size x 2
Screen frame 135 mm
−
thickness (5.31")*