Image-Making Position; Margin; Image-Making Area - Riso GOCCOPRO QS200 User Manual

Preface
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿

Image-making Position

Image-making always starts from the home position
which is located 80 mm away from the Front side
and 80 mm away from the START side of the screen
frame. The home position cannot be changed.
START
Home
position
80 mm

Margin

Margins are required on all four sides of artwork
data when you produce the image on the screen
frame. 80mm of margin is fixed on Start and Front
side and 80mm or more of margin is required on
End and Rear side of artwork data. (Margin on End
and Rear side may change according to the
registered Frame size.)
Appropriate Frame size have to be registered and
select the correct size of frame when you send
artwork data from PC. You also have to mind you
are sending appropriate size of artwork data
according to the image-making size selected.
80 mm
Rear
END
Front
80 mm or more
｜20｜

Image-making Area

Image-making area has to be 160mm or less then
the outer frame size in both X-direction (Width) and
Y-direction(Height).
Range:
X direction: 100 to 620 mm
Y direction: 100 to 420 mm
*) Setting increment: 0.1 mm
Minimum
Home
position
80mm 100mm
Maximum
80mm
260mm
780mm
620mm