Cutter Pen Nomenclature - GRAPHTEC FC2250 Service Manual

2.4 Cutter Pen Nomenclature

CAUTION
• Handle cutter blades with care!
Structure of the PHP31-CB09-HS Cutter Pen
(for cutter blades of 0.9 mm diameter)
Protective cap
* The CB09UA supersteel blade is shown in the figure above.
Structure of the PHP31-CB15-HS Cutter Pen
(for cutter blades of 1.5 mm diameter)
Protective cap
* The CB15U supersteel blade is shown in the figure above.
Structure of the PHP31-CB15B-HS Cutter Pen
(for cutter blades of 1.5 mm diameter)
Protective cap
* The CB15U-SP supersteel blade is shown in the figure above.
Structure of the PHP34-CB30-HS Cutter Pen
(for cutter blades of 3.0 mm diameter)
Cutter pen for 3.0-mm diameter blades fitted with a spring
Protective cap
* The CB30UC supersteel blade is shown in the figure above.
FC2250-UM-251-9370
Plunger Holder A
Plunger Holder A
Plunger Holder A
Spring Cutter blade*
Spring Cutter blade* Holder B
Blade length adjustment knob (blue)
Cutter blade* Holder B
Blade length adjustment knob (red)
Spring Cutter blade* Holder B
Blade length adjustment knob (green)
Plunger Holder
Blade length adjustment knob (silver)
2-5
2. Description of Parts
Plunger cap
Plunger cap
Plunger cap