Querying The Hdmi Mode Setting (Output Port); Setting The Hdmi Mode Setting (Output Port); Querying The Tps Mode Of The Transmitter; Setting The Tps Mode Of The Transmitter - Lightware HDMI-TPS-TX226 User Manual

   
7.LW3Programmer'sReference
7.6.23.3. Test Pattern
Command and Response
SET·/MEDIA/VIDEO/<out>.TpgPattern=<pattern>
ç
pw·/MEDIA/VIDEO/<out>.TpgPattern=<pattern>
æ
Parameters
Identifier Parameterdescription
<pattern> Selectabletestimage. RED / GREEN / BLUE / BLACK / WHITE /
RAMP / CHESS / BAR / CYCLE
Cyclesettingmeansallpatternsarechangedsequentiallyapprox.inevery2seconds.
Example #nosyncscreen #testpattern
ç SET/MEDIA/VIDEO/O1.TpgPattern=GREEN
æ pw/MEDIA/VIDEO/O1.TpgPattern=GREEN
7.6.24. Querying the HDMI Mode Setting (Output Port)
Command and Response #signaltype
ç GET·/MEDIA/VIDEO/<out>.HdmiModeSetting
pw·/MEDIA/VIDEO/<out>.HdmiModeSetting=<HDMI_mode>
æ
Parameters
Identifier Parameterdescription
<HDMI_mode> Current mode of the
video port.
The AutomodemeanstheoutgoingsignaltypeisbasedontheEDIDofthesinkconnectedtothegiven
outputport.IfHDMIissupportedbytheEDID,thesignaltypewillbeHDMI,otherwiseDVI.
Example
ç GET/MEDIA/VIDEO/O1.HdmiModeSetting
æ pw/MEDIA/VIDEO/O1.HdmiModeSetting=2
Parametervalues
Parametervalues
0: Auto,thesignaltypeisbasedontheEDID-seebelow.
1: DVI istheoutgoingsignaltype.
2: HDMIistheoutgoingsignaltype.
Appliedfirmwarepackage:v1.3.2b3 | LDCsoftware:v2.5.7b2
HDMI-TPS-TX200series–User'sManual
7.6.25. Setting the HDMI Mode Setting (Output Port)
Command and Response
SET·/MEDIA/VIDEO/<out>.HdmiModeSetting=<HDMI_mode>
ç
pw·/MEDIA/VIDEO/<out>.HdmiModeSetting=<HDMI_mode>
æ
Parameters
Seetheprevioussection.
Example
ç SET/MEDIA/VIDEO/O1.HdmiModeSetting=0
æ pw/MEDIA/VIDEO/O1.HdmiModeSetting=0
7.6.26. Querying the TPS Mode of the Transmitter
ThefinallyestablishedTPSworkingmodebetweenthetransmitterandthereceiverisdeterminedbythe
settingoftheTPSportsofbothdevices.SeemoreinformationintheTPSInterface
Command and Response #tpsmode
ç GET·/REMOTE/D1.tpsModeSetting
pw·/REMOTE/D1.tpsModeSetting=<TPS_mode>
æ
Parameters
Identifier
<TPS_mode> Current mode of the
TPSport.
Example
ç GET/REMOTE/D1.tpsModeSetting
æ pw/REMOTE/D1.tpsModeSetting=H
7.6.27. Setting the TPS Mode of the Transmitter
Command and Response
SET·/REMOTE/D1.tpsModeSetting=<TPS_mode>
ç
pw·/REMOTE/D1.tpsModeSetting=<TPS_mode>
æ
Parameters
Seetheprevioussection.
Example
ç SET/REMOTE/D1.tpsModeSetting=H
æ pw/REMOTE/D1.tpsModeSetting=H
Parameterdescription Parametervalues
A: Auto L: Longreach
H: HDBaseT
1:LPPF1
92
section.
2:LPPF2