The Progress Bar panel (see figure 57) controls the timing and position of the on-screen
status bar that includes stream, network condition, and device information.
Figure 57.
Enable Progress Bar — Check this box to enable or disable the progress bar.
1
NOTE: The progress bar displays when the clip starts and when playback resumes
after pausing the clip.
Duration — Use the adjustment arrows or enter the time directly in the duration field to
2
set the time (in seconds) the progress bar is displayed. Default is 5 seconds, maximum
is 500 seconds. 501 indicates the progress bar is always on. The IR remote can toggle
it on or off.
Position — Using the drop-down list, select the screen position of the OSD from one
3
of nine positions:
•
left-top (default)
left-center
•
•
left-bottom
Hide URL: — Check this box to hide the URL where the media files originates
4
Save — When all changes are complete, click Save to keep the new configuration.
5
Configuring the On-Screen Displays
Figure 58.
To enable and set up the on-screen displays:
Click Configuration>On Screen Display. The On Screen Display page opens
1.
(see figure 58).
Progress Bar Configuration
•
center-top
center-center
•
•
center-bottom
On-Screen Display Configuration (left), Position Drop-down List (right)
•
right-top
right-center
•
•
right-bottom
SMD 101 • Web-based User Interface
58