Date And Time - Extron electronics SMD 101 User Manual

Date and Time

The Date and Time page (see figure 77) allows automatic sync of the date and time from
the connected control device, and provides manual setting of the date and time, timezone,
and daylight saving mode.
Figure 77.
Click Sync Date and Time to PC (
connected PC.
NOTE: If you click the Sync Date and Time to PC button, the date and time
synchronization occurs immediately. The operation cannot be canceled. You do
not need to click Save (
Set the date and time on the device manually from the Date and Time page:
1. Press the Calendar icon (
date from the calendar dialog box.
2. Set the Time using the scroll list buttons (
3. Select the appropriate time zone from the Time Zone drop-down menu (
4. Click Save (
them.
You can automatically sync the unit with an external server-based source using Network
Time Protocol (NTP). When enabled, NTP Time Sync overrides manual date and time
settings when sync occurs.
1. Click the NTP Time Sync check box (
2. Enter up to three NTP server addresses in the NTP Server # fields (
3. Click Sync Now! (
Date and Time Panel
) to sync the date and time of the SMD 101 to the
1
) for this option.
8
) on the right side of this field to manually select the current
2
) to save the new date and time settings, or click Cancel (
8
).
6
), or enter the time directly into the fields.
3
).
5
SMD 101 • Web-based User Interface
).
4
) to discard
9
).
7
81