Powering Up; Input Selection; On-Screen Display (Osd) Menu System; Menu Navigation Using Front Panel Controls - Extron electronics IN1606 User Manual

Powering Up

When power is applied to the scaler, the Input selection buttons light amber, green, and then
red before illuminating just the selected input.

Input Selection

Press any of the Input selection buttons on the front panel to select an input. The current
active input lights as follows:

On-Screen Display (OSD) Menu System

Scaler configuration and adjustments can be performed by using the internal Web
pages (see
Configuration Software
(see
the OSD menu. The OSD menu is used primarily when the scaler is first set up.
NOTE: The OSD menu has a fixed time-out of 60 seconds.

Menu Navigation Using Front Panel Controls

Menu button — Press the Menu button to activate the OSD menu or close submenus and
settings.
Enter button — Press the Enter button to activate the OSD menu or select submenu
items.
Navigation buttons — Press the Up (
submenus or submenu items. Press the Right ( ) button to access currently selected
submenus or submenu items. Press the Left ( ) button to exit currently selected submenus
or submenu items. Also use the navigation buttons to adjust settings according to specific
setting directions.
Input Selection buttons — Press any of the Input selection buttons to change the
selected input.
Input Selection Button Lights
Color Signal
Amber Audio and video
Green Video only
Red Audio only
Internal Web Pages
on page 50), the Extron Simple Instruction Set (SIS) of commands
SIS Configuration and Control
IN1606 and IN1608 Series Scaling Presentation Switcher • Operation
on page 56), the Product Configuration Software (see
on page 29), or by using the front panel controls and
>
) button or the Down ( ) button to navigate
<
15