Panels And Cabling; Front Panel Features - Extron electronics SMD 101 User Manual

Panels and Cabling

This section provides information on:
•
•
•
•

Front Panel Features

The front panel of the SMD 101 is shown in figure 2 below.
A A A B B B C C C
A
B
C
Figure 2.
A
B
C
Front Panel Features
Rear Panel Features
SMD 101 Power Up Procedure
Hardware Setup Overview
D D D E E E
IR
CONFIG
Power LED
Playback status indicator
Network status indicator
SMD 101 Front Panel
Power LED — Dual color LED lights solid green when the SMD 101 is powered. Lights
solid red when in standby (low power) mode.
Playback status indicator — Dual color LED indicates playback operation:
• Solid Green — The SMD 101 is actively decoding a source (clip, image, or
stream).
Blinking Green — A source (clip, image, or stream) is selected, but playback is
•
paused.
Off — The selected stream is not being decoded.
•
• Solid Red — Unable to load (or play) the selected source.
Network status indicator — Dual-color LED indicates network operation and
connection or stream quality:
Solid Green — Indicates network conditions are favorable for the current source.
•
The LED is also green if the current source is a local file (see
Files on page 32).
Red/Green — When flashing red and green, indicates encoder or network
•
conditions could compromise image or audio quality, and buffers could be
depleted.
• Red — When lit, indicates degraded server or network conditions are
compromising video or audio quality and may have depleted the buffers.
• Off — No network connection.
NOTE: In many cases, the error correction features of the SMD 101 allow good
image quality even when degraded network conditions are indicated.
figure 2
IR receiver window
D
Config port
E
SMD 101 • Panels and Cabling
SMD 101
Browser Panel -
9