Table of Contents
Advertisement
IR Remote Control
The optional handheld IR remote control provides selection of pre-defined streams and
files, and direct control over playback. Features include standard transport controls for play,
pause, and stop. Up to 999 pre-configured channels can be directly accessed using the
digit buttons.
The following list details the available functions.
POWER — Toggles the SMD 101 power on and off.
CHANNEL — Steps up or down through the channel list from
the last selected channel.
VOLUME — Increase and decrease output volume to a display
device connected to the SMD 101 (see
on page 10).
Digits — Provides direct selection of up to 99 pre-defined
channels (see
AV MUTE — Mutes both the outgoing audio and video but
allows a stream to continue playback.
INFO — Launches an onscreen display with details of the
currently active stream (see
ENTER — After channel entry using direct selection (see Digits,
above) the entry is accepted after a short delay. Press Enter
after the channel entry to change to the channel immediately.
VIDEO MUTE — Mutes and unmutes only the video output.
AUDIO MUTE — Mutes and unmutes only the audio output.
PROGRESS — Provides real-time information of the current
playback stream in the on-screen display of a connected display.
It includes the total play time of the stream and the current
position of playback. The on-screen display duplicates the player
controls (see
TRANSPORT CONTROL — Provides remote access of
the player controls panel (see
page 23) including:
•
•
•
•
•
•
Lists Panel – Channels tab
On Screen Display
Progress Bar Panel
Player Controls Features
PLAY — Begins normal playback of the selected stream or
file.
PREV — When a playlist is loaded, returns to the previous
track.
PAUSE — Pauses the current playback, freezing the last decoded frame.
NEXT — When a playlist is loaded, moves to the next track.
LOOP — Places the currently selected clip or playlist into an endless loop.
STOP — Stops the playback of the current source.
Rear Panel Features
on page 38).
on page 56).
on page 57).
on
SMD 101 • IR Remote Control
110
Advertisement
Table of Contents
