Click Advanced Configuration>Password; Click Save ( 7 ) - Extron electronics SMD 101 User Manual

To create or change the user password:
1. Click Advanced Configuration>Password (see
The Password page opens (see
2. In the User Password field (
3. In the Confirm Password field (
4. Click Save ( ).
7
To clear a user password you must be logged on as an admin.
1. Click Advanced Configuration>Password (see
The Password page opens (see
2. In the User Password field (
3. Click Save ( ).
7
figure 63
figure 78
on page 83).
), enter the desired password.
5
), re-enter the password.
6
figure 63
figure 78 on page 83).
), delete the previous password.
5
SMD 101 • Web-based User Interface
on page 66).
on page 66).
84