Waters ACQUITY UPLC Operator's, Overview And Maintenance Manual page 65

4. Disconnect the detector's inlet and outlet tubing from the main column
connection.
Lamp
Lamp ID
Leak sensor
5. Disconnect the flow cell ID connector (if present).
6. Remove the flow cell:
• Using a 1/4-inch, flat-blade screwdriver, loosen the 3 thumbscrews
on the flow cell assembly's front plate.
Outlet tubing
Backpressure Inlet tubing
regulator
Flow cell ID connector
Maintaining the detector
Thumbscrews
Handle
Flow cell
assembly
TP03272
53