Waters ACQUITY UPLC Operator's, Overview And Maintenance Manual page 54

8. Align the leak sensor's T-bar with the slot in the side of the leak sensor
reservoir, and slide the leak sensor into place.
T-bar
Leak sensor
installed in
reservoir
9. If you detached the leak sensor connector from the front of the
instrument, reattach it.
10. In the ACQUITY UPLC Console, select your detector from the system
tree.
11. In the detector information window, click Control > Reset to reset the
detector.
42
TP02892
TP02908
Slot in leak
sensor reservoir